Powerfields

16' POWERFIELDS BUNGY GATE

Highly visible red and white electric bungy cord that expands from 8’ to 16’. 1 end has a heavy-duty gate handle. The other end has a sturdy pin-lock insulator.

4 SLOT CRIMP TOOL - RED

 RED 4 SLOT CRIMP TOO, WRENCH & GUAGE INCLUDED

4" SPIRALATOR TUBE INSULATOR W/ STAPLES - 25 PK

Unlike a normal fin tube, which you must put on before tensioning the wire, the Powerfields 4" Snap-Fin Insulator is put on after the wire is tensioned. A quick twist of the wrist and it snaps onto...

5 LITE WIRELESS VOLTAGE TESTER

 Simple 5 light wireless tester for all types of electric fence The lights are calibrated to illuminate from 2000 to 10000 volts No ground probe or extra wire required Includes 9V battery.

50' POWERFIELDS UNDERGROUND WIRE

Flexible Stranded Copper. Double Insulated. Highly Conductive Connects Energizer to Fence or Wire to Wire Carries Power Under Gates

660' POWERFIELDS HOT BRAID

Made with 3 material components. A polyester center core for strength, an outer braid of UV-stabilized polyethylene to provide flexiblity, and 9 strands of 8-mil stainless-steel wire for excellent...

6MM Double Post Rope Splicer

6mm Double post rope splicer for splicing rolls of 1/4 inch electric rope.

825 ft Electric 1 1/2 inch Polytape

Safe-Fence 1 1/2 inch wide Permanent Polytape

C23 Standard Crimp Sleeves

C23 Sleeves are used on 12 ½ gauge wire, and are used in the 2-3 slot on your crimping tool. These are short sleeves so use 3 on a splice or join and 2 on an end, or with an in-line strainer...

C2L-Long Crimp Sleeves

Long crimping sleeves are available and are becoming very popular. You can use one long crimping sleeve for all applications. You will need to crimp the entire length of the sleeve with your crimping...

C34 Crimp SLeeves

Sleeves are used on 10 ½ gauge smooth wire and 14 gauge barbed wire. Fit’s the 3-4 crimping tool slot. Sold in bottles of 50. This is a short sleeve so use 3 for your joins or...

C45 Crimp Sleeves

Sleeves are used on 8 gauge smooth wire and 12 ½ gauge barbed wire. Fits the 4-5 crimping tool slot. This is a short sleeve so use 3 for your joins or splices and 2 on end terminations...